d sub 9 to hdmi
Rings custom fabrication of speakers can be a quick way to save some money if you're willing to spend a short time setting. In this guide will explain the process to a base ring and a ring. Before you begin, make a guide of tools. You can free hand cut rings, but for more results professionals who need a guide. The guide is just a piece of aluminum stock with the Roto-Zip installed on one side with holes drilled in shares of its length. If you do not have A broken-Zip can do the same puzzle.
For the first cut she cut a large circle of MDF. For a basic mounting ring for a subwoofer or other speaker, you need to make the circle at least an inch taller than most speakers. For a 12 "Sub Woofer be cut to 13-inch circle. This means let's use the hole tool is 6 1 / 2 "tool. Once you've checked your distance of putting a small screw through the right hole, leaving enough to unscrew to allow court staff to rotate freely.
The next step is to make the cut from inside. This cut must be at least the selection size of the speakers. For a 12 "speaker which is usually about 11" This means establishing the guidance of 5.5 "and repeat the steps above.
If you are making rounds of the mounting base for something kick-pods as speakers or the bridge already. However, in some cases, like the spare wheel and assembly, access to running water is required. For this you have to cut a second ring. The court will be in the size of the speakers and cut the exterior should be ~ 1 "larger than cutting the ring before. So in this example, the second ring has an inner dimension 12 "and an external dimension of 14"
Once sure that all your measures are correct, wrong or more sanding rings. If you use nuts to hold your speaker is the time to install them.
With the two rings cleaning, now is the time to gather them. Apply wood glue around the ring before being pinned.
Using a fine finishing nails or finishing nailer Nail recovery in 6-8 places. The nails are used to maintain room to move up the tail is a chance to dry.
Finally, check the setting of your speaker. If you need minor adjustments, it is easy to do at this time. Sandpaper will enlarge the hole a little if measured wrong.
http://www.volvospeed.com
Images and updates can be seen at: http://volvospeed.com/Mods/speaker_rings.html
IFA 2009 Highlights (9/20): ELAC MicroSUB 2010 Art Edition
